Purolite is the newest breakthrough in Biodiesel
technology!
Basic Features:
Application
BioDiesel Purification
Polymer Structure
Gel polystyrene
cross linked with
divinylbenzene
Appearance
Hard Spherical beads
Functional Group
Sulfonic Acid
Ionic
form as shipped
H+
Product Data:
Moisture Retention
H+
50 - 60 %
Specific Gravity
1.20 g/ml
Shipping Weight
(approx.)
800 - 830 g/l
Shipping Weight
(approx.)
50 -
52 lbs/ft3
Temp Limit (Stability)
150 °C
Temp Limit (Stability)
300 °F
Pay Pal
GoEMerchant
50
Pound Box Shipping
Is Not Included
$545.50
\/
250
Pound Drum Shipping
Is Not Included
$2,435.50
\/
B-60 Purolite Ion Filter
The Purolite filter that can go with the B-60
Filter screens, housing and two
pounds of Purolite
Specifications:
Capacity 1 pound ion exchange
resin
Flow rate: 0.5 GPM
B-60 Purolite Filter Free Shipping within US
ORDER TODAY!
Purolite Ion
Filter $199.00 (Free Shipping In US)
PayPal
Purolite Ion
Filter $199.00 (Free Shipping In US)
GoEMerchant
B-150 Purolite Ion Filter
The Purolite filter that can go with the B-150
Filter screens, housing and 4
pounds of Purolite
Specifications:
Capacity 2 pound ion exchange
resin
Flow rate: 0.5 GPM
B-150 Purolite Filter Free Shipping within US
ORDER TODAY!
Purolite Ion
Filter $399.00 (Free Shipping In US)
PayPal
Purolite Ion
Filter $399.00 (Free Shipping In US)
GoEMerchant
B-150 Purolite Ion Tower
Features:
The Purolite filter kit that can go with the B-150
comes with 100 Micron Sock
Filter, Assembly materials, PVC
Pluming, PVC ball valves, Couplers, Bushings,
Unions, Barbed Nipples, housing, assembly
instructions & Phone Support.
The Purolite filter kit that can go with the B-500
comes
with 100 Micron Sock Filter, Assembly materials, PVC Pluming, PVC ball valves, Couplers, Bushings, Unions, Barbed Nipples, housing, assembly
instructions & Phone Support.
Purolite is good for
300
gallons of Biodiesel flow thru
per pound. If rinsed with methanol every
45
gallons of flow thru per pound
you can get
600
gallons of flow thru per pound
and that methanol can be used for the next batch
This media may replace magnesium
silicate “wash” and water wash.
Purolite is good for 300 gallons of Biodiesel
flow thru per pound. If rinsed with methanol
every 45 gallons of flow
thru per pound
you can get 600 gallons of flow
thru per pound and that methanol
can be used for the next batch
No
Wet Wash Aids Needed
Ion exchange polishing
systems consist of 1 resin
vessel operating at 0.5 gpm. This vessel is design based
on a maximum flow of 3 bed
volumes (BV) per hour (dry
volume) for our single vessel.
Therefore if the volume of dry
resin would equals 10 gallons in
one vessel, 30 BV equals 30
gallons Maximum flow is now 30
gallons divided by 60 minutes
per hour or 0.5 gpm (not 0.5 gpm
times the number of vessels). If
variable flows are expected or
expansion is an option multiple
trains operated in parallel
should be considered. Vessels
are designed so that the aspect
ratio will be approximately 3:1
with the height of the vessel
being 3 times the diameter.
Linear flow is approximately
0.5-
PUROLITE®
PD206 is a dry
polishing media specifically
formulated for removing
by-products remaining after
transesterification to produce
Biodiesel.
PUROLITE®
PD206 is designed for
use in “purification” vessels
installed after phase
separation. Point of use can
either be before demethylation
to remove catalyst and glycerin
and prevent back reactions or
after demethylation as a “final”
polishing step.
Once PUROLITE®
PD206 is ready for disposal,
it should be disposed of in
approved landfills or
facilities according to
local regulations. Check
with your local
waste management company for
proper disposal
instructions.
PUROLITE® PD206
improves plant
productivity and lowers
operation costs while enabling
ASTM or EN specifications for
B100 to be achieved.
PUROLITE® PD206
has a long life
before exhaustion. This life
is dependent upon the point
of installation in the
Biodiesel process and on the
level of impurities in the
untreated Biodiesel.
PUROLITE® PD206
functions both as a
dehydrating (desiccant)
media and as an ion exchange
polishing media.
As a
desiccant PUROLITE®
PD206 has a high
loading capacity to absorb
free glycerin. Trace
methanol and water although
being absorbed to a limited
degree can be removed by
stripping in the demethylation column.
Additionally the exceptional
exchange capacity removes
residual catalyst, and salts
that remains after phase
separation.
PUROLITE®
PD206 is flow able
both in the dry form and
when exhausted, making it
easy to handle during
installation and removal
from “purification” vessels.
PUROLITE®
PD206 is fully
compatible for use in methyl
ester and ethyl ester
purification processes.
PUROLITE® PD206
can be washed with methanol
on site several time to
maintain it's ability to
remove glycerin. However it
must be ionically
regenerated to maintain the
ability to remove trace
catalyst and soaps. Consult
your Purolite representative
for availability and
details.
The actual life of
PUROLITE® PD206
will vary depending
on process designs and
operating characteristic of
methyl ester feed quality.
